Centralite Zigbee Temperature and Humidity Smart SensorCTL-SS-3310-WT
The Centralite Zigbee Temperature and Humidity Smart Sensor detects both temperature and humidity levels, so you can get a "true" comfort level. You can place the sensor in a different room than the thermostat to keep the perfect temperature for the right room or trigger A/C to turn on when humidity levels rise. The Centralite Zigbee Temperature and Humidity Smart Sensor enhances the performance of your smart thermostat and an essential addition to your home heating system.
Detects Temperature and Humidity to ensure true comfortDetects both temperature and humidity levels, so you can get a "true" comfort level. You can place the sensor in a different room than the thermostat to keep the perfect temperature for the right room or trigger A/C to turn on when humidity levels rise.
Precision Temperature and Humidity ReportingThe Centralite Zigbee Temperature and Humidity Smart Sensor has precise readings with accurate temperature reporting down to 0.1°C and humidity reporting down to 1% RH, to ensure the optimal temperature is maintained at all times.
Built-in power amplifier for exceptional rangeThis smart sensor includes a built-in power amplifier to ensure superior range and stability in large homes or areas with wireless interference.
Simple "Pair-to-Pull" Joining ProcessThe pairing process is as simple as pulling out a small plastic tab from the bottom of the device. There is nothing for the user to take apart or put back together.
Easy-to-InstallThe Centralite Zigbee Temperature and Humidity Smart Sensor is quick and easy-to-install with a mounting plate that can be installed using either adhesive strips or mounting screws and the sensor simply slides into place on the mount.
Over-the-air updatesGet over-the-air updates, providing for seamless upgrades and feature additions, so you'll always have the latest firmware without having to check for the updates.
Compatible with All ZigBee HA 1.2 Platforms
- Time Warner IntelligentHome
- Cox Homelife
- Bright House Networks Home Security and Automation
- Rogers Home Monitoring
- Frequency: ZigBee Home Automation 1.2
- Power: CR-2 Battery
- Operating Temperature: 0 to 40°C
Shipping/Storage Temperature: -20 to 50°C
Humidity Range: 0 to 90% R.H. (non-condensing)
- Warranty: 1-Year Limited Warranty.
- Temp & Humidity Sensor
- Sensor Mount
- CR-2 Battery (pre-installed)
- Installation Guide
- Mounting Screws
- Adhesive Mounting Strip
Step 1: Open ZigBee Network for Joining
Using your controller or hub’s interface, enable the ZigBee network for joining.
Step 2: Pull Tab from Side of Sensor
Pull the small plastic tab out from the side of the sensor and it will immediately begin searching for a network to join.
Step 2: Finish Joining at Hub (optional)
Some hubs and controllers require additional steps such as naming or categorizing the device.
We Also Recommend
Yale Z-Wave Plus Network Module