Centralite Zigbee Smart Water SensorCTL-SS-3315-WT
The Centralite Zigbee Smart Water Sensor is your first line of defense against water damage by catching a water leak early, so you may be able to avoid expensive repairs and loss of treasured items. It is small, easy-to-use, and can be placed anywhere vulnerable to water leaks including water heaters, drain pans, and underneath sinks. It uses capacitance detection for sensitive and accurate detection of as little as 0.5 ounces of water. You can protect your home even when you're away with the Centralite Zigbee Smart Water Sensor.
Be alerted as soon as water is detectedThe Centralite Zigbee Smart Water Sensor will send a notification to alert you if water is detected, so you can take action early and mitigate further damage.
Detects as little as 0.5 ounces of waterThis smart water sensor uses capacitance detection for sensitive and accurate detection of as little as 0.5 ounces of water, ensuring you catch leaks early before there is expensive flood damage.
Automatically shut off water supplyThe Centralite Zigbee Smart Water Sensor can trigger a connected water shut-off valve to close the main water supply if water is detected, ensuring your home is protected against leak and flood damage, even when you’re away from home or unaware that there’s a problem.
Water ResistantThe Centralite Zigbee Smart Water Sensor is water resistance to ensure notifications are sent before damage to sensor occurs.
Built-in power amplifier for exceptional rangeThis smart water sensor includes a built-in power amplifier to ensure superior range and stability in large homes or areas with wireless interference.
Simple "Pair-to-Pull" joining processThe pairing process is as simple as pulling out a small plastic tab from the bottom of the device. There is nothing for the user to take apart or put back together.
Compatible with All ZigBee HA 1.2 Platforms
- Time Warner IntelligentHome
- Cox Homelife
- Bright House Networks Home Security and Automation
- Rogers Home Monitoring
- Rated: 3V
- Battery: CR-2 (1x)
- Battery Life: 2 to 3 years
- Operating Temperature: 0° to 40°C
- Temperature: -20° to 50°C
- Humidity Range: 0 to 90% RH. (non-condensing)
- Protocol: ZigBee HA 1.2
- TX Strength: +18 dBm
- RF Channels: 16
- Range: 300+ ft. (90+ m) L.O.S.
- Temp Accuracy: ±1.8 °C (max), –10 to 85 °C
- Precision: ±0.1 °C
- Includes: 1x - 3-Series Water Sensor 1x - CR-2 Battery 1x - Quick Start Guide
Step 1: Open ZigBee Network for Joining
Using your controller or hub’s interface, enable the ZigBee network for joining.
Step 2: Pull Tab from Side of Sensor
Pull the small plastic tab out from the side of the sensor and it will immediately begin searching for a network to join.
Step 2: Finish Joining at Hub (optional)
Some hubs and controllers require additional steps such as naming or categorizing the device.