The Insteon SwitchLinc 600W Dual-Band Smart Dimmer is an elegant addition to your smart home with the ability to remotely turn on/off/dim your lights from your smartphone when connected to the Insteon hub. With the Insteon SwitchLinc 600W Dual-Band Smart Dimmer, you can create scenes to control multiple devices simultaneously with a single tap or set schedules to automatically turn on your porch lights at dusk. 

Features

• Remotely turn on/off/dim your lights from your smartphone
  

  The Insteon SwitchLinc 600W Dual-Band Smart Dimmer gives you the ability to remotely turn on/off/dim your lights from your smartphone when connected to the Insteon hub, giving you complete control of your lighting from anywhere.
  

• Create Powerful Scenes
  

  You can create elegant whole-home lighting scenes to control multiple devices simultaneously with a single tap in minutes, helping to streamline and automate your lighting.
  

• Set Automatic Schedules
  

  You can schedule individual wall switches or full groups of switches to turn on/off during particular hours and days of the week, so your lights automatically turn on when you need them.

• Dual Band Support
  

  The Insteon SwitchLinc 600W Dual-Band Smart Dimmer uses both powerline and wireless Insteon communication simultaneously for the best possible communication reliability and doubles as wireless access point and Insteon repeater.

• Save Money on bills
  

  The Insteon SwitchLinc 600W Dual-Band Smart Dimmer helps you save money on bills, as you can ensure your lighting is never left on longer than needed.

• Customize on-level and fade on/off speed
  

  You can customize on-level and fade on/off speed to match your preferences.

COMPATIBILITY

Works with

 *

*When connected to the Insteon Hub

SPECS

Technical Specifications

• On-Levels: 32 locally, increments of 1% with software
  
• Ramp Rates (full-ON to full-OFF):
• 0.125 to 9 seconds if programmed locally,
• 0.125 seconds to 8 minutes if programmed remotely
• LED Indicator: 9 White LEDs, Optional Green, Blue, Amber, or Red with item 2400L Kit
• Operation Modes: Insteon
  
• Multi-Way Circuit Support: One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Dimmers or other Insteon Controllers
• Setup Memory: Non-volatile EEPROM
  
• Insteon Addresses: 1 hard-coded out of 16,777,216 possible
  
• Insteon Links: 417
  
• Insteon Powerline Frequency: 131.65 kHz
  
• Insteon Minimum Transmit Level: 3.2 Vpp into 5 Ohms
  
• Insteon Minimum Receive Level: 10 mV
  
• Insteon Messages Repeated: Yes
  
• Radio Frequency: 915 MHz
  
• Ramp Rates (full-ON to full-OFF):
• 0.125 to 9 seconds if programmed locally,
• 0.125 seconds to 8 minutes if programmed remotely via software
• Paddle Type: True rocker action
  
• Wire Nuts: 4
  
• Mounting: Mounts in a single or multiple-ganged junction box. Control 200 W less load for each immediately adjacent Dimmer Switch installed. For example, 600 W load control becomes 400 W with another dimmer to the immediate right or left. Use a triple-gang box with a mechanical switch in the center to avoid de-rating.
• Operating Conditions: Indoors, 32 to 104° F, up to 85% relative humidity
  
• Dimensions: 4.1" H x 1.8" W x 1.2W" D
  
• Weight: 3.6 oz
  
• Supply Voltage: 100-277 Volts AC +/- 10%, 50/60 Hertz, single phase
  
• Neutral Wire: Required
  
• Power Wire Leads: 6", 18 AWG, stranded,600V, 105° C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white)
• Maximum Amps: 5 amps
  
• Ground Lead: 6", 18 AWG, stranded, bare copper
  
• Load Types: Wired-in incandescent lighting devices
  
• Maximum Load: 600 Watts (uses 12-Amp triac dimmer)
  
• Power Consumption: 0.56 Watts
• Includes:
• Insteon Dimmer Switch
• Quick Start Guide
• Mounting Screws
• Wire Nuts

INSTALLATION

Installation Guide

Quick Start Guide
Owner's Manual